Manifold Systems – DC Welding | Christchurch welder sales, service and hire https://dcwelding.co.nz Christchurch welder sales, service and hire Mon, 10 May 2021 23:18:27 +0000 en-NZ hourly 1 https://wordpress.org/?v=6.9.1 https://i0.wp.com/dcwelding.co.nz/wp-content/uploads/2020/09/cropped-fav.jpg?fit=32%2C32&ssl=1 Manifold Systems – DC Welding | Christchurch welder sales, service and hire https://dcwelding.co.nz 32 32 214571045 TESUCO SAFETY RELIEF INERT/FUEL VALVES https://dcwelding.co.nz/product/tesuco-safety-relief-inert-fuel-valves/?utm_source=rss&utm_medium=rss&utm_campaign=tesuco-safety-relief-inert-fuel-valves Mon, 10 May 2021 23:13:29 +0000 https://www.dcwelding.co.nz/?post_type=product&p=1729 Tesuco Safety Relief Valves (SRV) have been specifically designed to meet the requirements in Australian Standards.
The requirements in AS 1271, AS 4289 and AS 5034 have all been met for protecting low pressure equipment from excess pressure. There are a number of units designed to operate at various pressures as listed below to protect pipework and downstream equipment.

Range of Models with varying pressures available, including:

  • 190kPa
  • 2600kPa
  • 300kPa
  • 600kPa
]]> 1729 TESUCO SAFETY RELIEF OXY VALVE https://dcwelding.co.nz/product/tesuco-safety-relief-oxy-valve/?utm_source=rss&utm_medium=rss&utm_campaign=tesuco-safety-relief-oxy-valve Mon, 10 May 2021 23:08:46 +0000 https://www.dcwelding.co.nz/?post_type=product&p=1726 Tesuco Safety Relief Valves (SRV) have been specifically designed to meet the requirements in Australian Standards.
The requirements in AS 1271, AS 4289 and AS 5034 have all been met for protecting low pressure equipment from excess pressure.

Features:

Safety Relief Valve Oxygen
1300kPa In:1/4NPT Out:1/2NPT
Cleaned for Oxygen Use

]]> 1726 TESUCO INERT RELIEF MANIFOLD https://dcwelding.co.nz/product/tesuco-inert-relief-manifold/?utm_source=rss&utm_medium=rss&utm_campaign=tesuco-inert-relief-manifold Mon, 10 May 2021 22:43:01 +0000 https://www.dcwelding.co.nz/?post_type=product&p=1723 Safety Relief Valves and Safety Relief Valve Systems are designed to protect low pressure equipment downstream from the regulator in the event of a major failure. They are designed and made in Australia specifically for the application and to meet the requirements of relevant standards.

Features:

Safety Relief Valve System
Inert Gas 1,300 kPa
With Isolation Valve
]]> 1723 TESUCO NITROGEN MANUAL MANIFOLD https://dcwelding.co.nz/product/tesuco-nitrogen-manual-manifold/?utm_source=rss&utm_medium=rss&utm_campaign=tesuco-nitrogen-manual-manifold Mon, 12 Apr 2021 21:35:42 +0000 https://www.dcwelding.co.nz/?post_type=product&p=1585 Features:

Single Manual Manifold
G3/8″ RH M – Type 50 Nitrogen
MWP: 30,000 kPa

]]> 1585 TESUCO NITROGEN MANIFOLD LEAD https://dcwelding.co.nz/product/tesuco-nitrogen-manifold-lead/?utm_source=rss&utm_medium=rss&utm_campaign=tesuco-nitrogen-manifold-lead Mon, 12 Apr 2021 21:34:12 +0000 https://www.dcwelding.co.nz/?post_type=product&p=1583 Features:

Flexible Lead Nitrogen 1800 mm
Type 50 – 3/8 BSP RH 30,000kPa
Anti Whip
]]> 1583 TESUCO CO2 MANIFOLD LEAD https://dcwelding.co.nz/product/tesuco-co2-manual-manifold/?utm_source=rss&utm_medium=rss&utm_campaign=tesuco-co2-manual-manifold Mon, 12 Apr 2021 21:31:48 +0000 https://www.dcwelding.co.nz/?post_type=product&p=1580 Features:

Flexible Lead CO2 1800 mm
Type 30 – 3/8 BSP RH 30,000kPa
Anti Whip

]]> 1580 TESUCO GAS CYLINDER BRACKET https://dcwelding.co.nz/product/tesuco-gas-cylinder-bracket/?utm_source=rss&utm_medium=rss&utm_campaign=tesuco-gas-cylinder-bracket Mon, 12 Apr 2021 21:28:51 +0000 https://www.dcwelding.co.nz/?post_type=product&p=1578 Made of Stainless Steel.

]]> 1578 TESUCO FLEXIBLE OXYGEN MAINFOLD LEAD https://dcwelding.co.nz/product/tesuco-flexible-oxygen-mainfold-lead/?utm_source=rss&utm_medium=rss&utm_campaign=tesuco-flexible-oxygen-mainfold-lead Mon, 12 Apr 2021 21:27:09 +0000 https://www.dcwelding.co.nz/?post_type=product&p=1576 Features:

Flexible Lead Oxygen 800 mm
Type 10 – 3/8 BSP RH 20,000kPa
Anti Whip
]]> 1576 TESUCO FLEXIBLE INERT GAS MAINFOLD LEAD https://dcwelding.co.nz/product/tesuco-flexible-inert-gas-mainfold-lead/?utm_source=rss&utm_medium=rss&utm_campaign=tesuco-flexible-inert-gas-mainfold-lead Mon, 12 Apr 2021 21:24:27 +0000 https://www.dcwelding.co.nz/?post_type=product&p=1573 Features:

Flexible Lead Inert Gas 800 mm
Type 10 – 3/8 BSP RH 30,000kPa
Anti Whip

]]> 1573 TESUCO FLEXIBLE ACET MANIFOLD LEAD https://dcwelding.co.nz/product/tesuco-flexible-acet-mainfold-lead/?utm_source=rss&utm_medium=rss&utm_campaign=tesuco-flexible-acet-mainfold-lead Mon, 12 Apr 2021 21:18:24 +0000 https://www.dcwelding.co.nz/?post_type=product&p=1570 Features:

Flexible Lead Acetylene 800 mm
Type 20 – 3/8BSP LH 2500kPa
Anti detonation Anti whip

]]> 1570