Description

The heaters are suitable for pressures up to 200 bar (20,000 kPa). The media flowing through the system are evenly warmed through an automatic temperature control, so that an uninterrupted flow – even when in constant use – is provided. There are two mounting options available. One has type 30 connections and can be mounted between the cylinder and the regulator, or on a wall mounted manifold arrangement, between the manifold and regulator. Gas warmers should be situated under cover as the units are weather proof but not waterproof. It is recommended that the power is disconnected when the system is out of use for long periods as the gas heater can overheat the gas. When the system is not being used the cylinder valve should be shut and the gas pressure released from the system.

Description:

Gas Heater
for Welding Gas, Type 30 Nut &
Stem Inlet / T30 Male Outlet